MR-C1 gear wear testing machine
OverView
Main use The machine is a multi-purpose testing machine. It can be used for the evaluation of the bearing capacity of the lubricant, or it can be specially ordered according to the needs of the user, and it can be used for the test of gear bending fatigue strength and gear contact fatigue strength.
Main technical specifications and parameters
MR-C1 gear wear testing machine
Maximum torque: 1kNm
Maximum load level: 13 level
Temperature control error: +-2 Degree C
Drive motor power: 6.5kW ( 8kW )
Speed: 1450r/min ( 2880r/min )
Test the gearbox capacity (the part from the centerline of the shaft to the bottom of the box) 1.25L
Heating power: 0.5kWx3=1.5kW
Dimensions (length x width x height) mm :
Host: 1390mmx705mmx1082mm
Control box: 560mmx450xmmx525mm
Standard test gear
Number of touches: 4.5
Number of teeth: the Z Large = 24 Z small = 16
Modification coefficient: X large = -0.5 X small = 0.8523
Tooth angle: 22Degree26inch
Center distance: 91.5mm
Accuracy: 5 Ji
Applicable standard
SH/T 0366-1992 Lubricating capacity test method ( CL-100 gear machine method)
Main use The machine is a multi-purpose testing machine. It can be used for the evaluation of the bearing capacity of the lubricant, or it can be specially ordered according to the needs of the user, and it can be used for the test of gear bending fatigue strength and gear contact fatigue strength.