Combustible Gas Detector SPD202

Categories: Alat Pengujian

Section:

Type:

Seller:

OverView

SPD202 combustible gas detector can be used in hazardous areas indoors and outdoors, where combustible gas is produced, stored, used, etc., such as chemical, petroleum, metallurgy, oil depot, LPG (Liquefied Petroleum Gas) station , pharmaceutical, gas transmission and distribution, etc. to detect the leakage and show the leaking concentration with a digital display. This device can set two-level alarming value. The detector can raise the acousto-optic alarming when the detected concentration reaches the preset value

Gas leakage detecting of city gas
Combustible gas leakage detecting of petrochemical industry
Combustible gas leakage detecting of Shipbuilding industry
Combustible gas leakage detecting of Depot, gas station
Combustible gas leakage detecting of oil tank truck
Combustible gas leakage detecting of fire & rescue industry

Masukkan keterangan produk disini.

1) Detecting principle: catalytic combustion
2) Detected gas: combustible gas
3) Measurement range: 0-100% LEL ,0~50000ppm(LEL: Low Explosion Level - the lowermost concentration of combustible gas to generate an explosion in air when meeting a naked flame)
4) Resolution: 0.1%LEL, 5ppm
5) Error: 5%
6) Response time: 1s
7) Operation temperature: -10??60?
8) Operation humidity: <99%RH
9) Display mode: digital display with large LCD screen
10) Alarming method: acousto-optic alarming
11) Power supply: 4×1.5V AA batteries
12) Current:
13) Measured gas type: natural gas, liquefied petroleum gas, coal gas and other combustible gas, as well as organic solvent volatilization gas of gasoline, alcohol, ketone, etc