DIGITAL MONITOR MODEL-2590A

The Digital Monitor Model-2590 receives a 4-20mA signal from the vibration converter,scales it into a vibration converter scales it into a vibration value for digital display and allows the vibration to be monitored by using a 2-high limit position alarm contact output. As an oprrating power supply for vibration converter is incorporated to make installation easier.

SPECIFICATIONS
INPUT SIGNAL	4-20mA(Span/Zero fine adjuster provided)
INDICATION RANGE	Can be set at 0 to intended value on scale value.
INDICATOR	7-segment red LED,5-degit.
SAMPPLING CYCLE	Can be set at 0.1/0.2/0.5/1/2/5 seconds.
ACCURACY	±0.3%±1digits(23°C±5°C)
POWER SUPPLY FOR CONVERTER	+24V DC,50mA max.
ALARM SETTING	2 hight limit positions AL Ⅰ(HH) and AL Ⅱ(H)
ALARM VALUE CHECK	Indicated by pressing AL I or II
ALARM RELAY CONTACT	Transfer.Rating AC 250V 5A, DC30V 5A max.
ALARM DELAY	Can be set at 0-99.99 sec. as desired.
ANALOG OUTPUT(OPTION)	4-20mA(500Ωmax),0-5V,1-5V,0-10V(2KΩmin) when ordering.
POWER SUPPLY	AC85-264V 50/60Hz, 15VA max.
OPERATING TEMP.AND HUMIDITY	0-50°C,45-85%RH max.(No dewing shall occur.)
DIMENSIONS AND WEIGHT	96(W)×48(H)×90.4(D)mm Approx 300g

Back