VIBRO-CONVERTER
MODEL-2501

Compact piezoelectoric sensor suitable for measuring application such as high temperature and high vibration level is selectable. 4 to 20mA output corresponding to vibration values is adjustable within a certain range. AC output is available for waveform analysis using a FFT analyzer. This unit is easily connectable to a recorder, indicator or data collector is a remote location.

SPECIFICATIONS
Maximum charge input	±1000pC
Maximum input capacity	10000pF
Acceleration measurement(Measured value for detector 5pC/m/s2)
Measuring range	Any value is adjustable to maximum output of 20mA within the range of 20m/s2 to 200m/s2
Resolution	0.1m/s2
Frequency range	3Hz-10KHz(-3dB), 5Hz-8KHz(-1dB)
	10Hz-5KHz(±0.5dB)
Low-pass filter	IN……1KHz cut-off (-3dB), Any frequencyis optionally available(within range of 50Hz to 5KHz).
	OUT…·10KHz cut-off(-3dB), Fixed
Velocity measurement(Measured value for detector 5pC/m/s2)
Measuring range	Any value is adjustable to maximum output of 20mA within the range of 20m/s to 200m/s.
Resolution	0.1mm/s
Frequency range	7Hz-10KHz(-3dB), 10Hz-6KHz(±1dB)
Displacement measurement(Measured value for detector 5pC/m/s2)
Measuring range	Any value is adjustable to maximum output of 20mA within the range of 0.2mmp-p to 2mmp-p.
Resolution	0.001mmp-p(1μm)
Frequency range	8Hz-10KHz(-3dB), 10Hz-700KHz(±1dB)
DC output	4-20mA, Load resistance……300Ω
	Detection……AVE-PEAK
Control. AC output	±2V full scale (fixed with full scale that is determined according to pick-up sensitivity)
Accuracy	5% or less(80Hz, 10m/s2, sine wave, normal temp)
Linearity	1% or less
Diving power	DC11V-26V, 30mA
Temp.&humidity range	Operation; 0-50°C, Storage: -20°C-70°C
	90% RH or less
Case material	Aluminum alloy (Neoprene packing)
Component Device	Converter cable: CA4612-3m(3m)

Back