Slipring torque sensor, 0 ... 6 N·m to 0 ... 1 000 N·m |
 |
Technical data |
Type 4501A... |
Measuring range N·m
(Nominal torque)
|
2 / 12 / 25 / 63 / 169 / 500 / 1 000 |
| Maximum torque |
1,5 x rated torque |
Alternating torque |
0,7 x rated torque |
Accuracy class % |
0,2 |
| Output signal (Rated value) mV/V |
±1 ... 2 (depending on version) |
| Speed measurement pulses/rev. |
2 x 360 |
| Nominal speed 1/min |
≤3 000 |
| Balancing grade Q |
- |
Operating temperature range °C (Rated temperature range)
|
5 ... 50 |
Case material |
Aluminum, hard anodized |
L mm
W mm
H mm
|
44 ... 73
28 ... 73
52 ... 90 |
Degree of protection |
IP40 |
Electrical connections |
6 pin or 12 pin Binder connector |
Properties Universal
torque sensor, Compact various shaft connections.
|
Areas of application
Designed specifically for use in screw connection. Typical applications include the testing of built-in nutrunners or torque measurement with hand screw driving tools. For brief, intermittent operation at low
speeds.
|
Mini-Smart torque sensor, 0 ... 0,5 N·m to 0 ... 1 000 N·m |
 |
Technical data |
Type 4502A...
|
| |
|
Measuring range N·m
(Rated torque)
|
0,5 / 1 / 2 / 6 / 12 / 18 / 50 / 63 / 100 / 150 / 160 / 250 / 300 / 500 / 1 000 |
Maximum torque |
1,5 x rated torque |
| Alternating torque |
0,7 x rated torque |
| Accuracy class |
0,2 |
Output signal VDC
(Rated value)
|
±0 ... 5 |
Speed Measurement pulses/rev. |
2 x 360 or 60 |
Nominal speed 1/min |
<12 000 |
Balancing grade Q |
6,3 |
Operating temperature range °C
(Rated temperature range)
|
10 ... 60 |
| Case material |
Aluminum, hard anodized |
L mm
W mm
H mm
|
44 ... 73
28 ... 73
52 ... 90 |
Degree of protection |
IP40 |
Electrical connections |
12 pin Binder connector |
Properties
Torque sensor with noncontact signal transmission, integral measurement electronics and high level of interference immunity. Compact design, various shaft connections. and noncontact signal transmission.
|
Areas of application
Suitable for dynamic measurement of tightening and release torques in screw connection and assembly, and for quality control in production and the laboratory. Suitable for continuous use, for example in process monitoring. |
| Dual range sensor with noncontact transmission, 0 ... 0,2 N·m to 0 ... 5 000 N·m |
 |
Technical data |
Type 4503A...
|
| |
|
Measuring range N·m
(Rated torque)
|
0,2 / 0,5 / 1 / 2 / 5 / 10 / 20 / 50 / 100 / 200 / 500 / 1 000 / 2000 / 5 000 |
Maximum torque |
1,5 x rated torque |
Alternating torque |
0,7 x rated torque |
| Accuracy class % |
0,1 or 0,05 (depending on version) |
Output signal VDC
(Rated value) kHz
|
±0 ... 5 or ±0 ... 10
or 100 ±40 and RS-232C |
| Speed measurement pulses/rev. |
60 or 2 x 360 |
Nominal speed 1/min |
<50 000 |
Balancing grade Q |
2,5 or 6,3 (depending on version) |
Operating temperature range °C Type 4503A... (Rated temperature range)
|
10 ... 60 |
Case material |
Aluminum, hard anodized or stainless steel (depending on version) |
L mm
D mm
H mm
|
113 ... 137
58 ... 148
74 ... 178 |
Degree of protection |
IP40 |
Electrical connections |
7 pin or 12 pin Binder connector |
Properties
Ideal sensor for two separately
calibrated measuring ranges. Integral
measurement electronics, extremely
high accuracy, extremely high speed
ranges and digital signal processing.
This sensor is also available as a
single range sensor.
|
Areas of application
Universal application in the development laboratory, production or quality assurance.
|
| Torque measuring flange - short design, robust, without mechanical bearings, extremely accurate, 200 ... 10 000 N·m |
 |
Technical data |
Type 4504A... |
| |
|
Measuring range N·m (Rated torque)
|
50 / 100 / 200 / 500 / 1 000 / 2 000 / 3 000 / 5 000 / 10 000 |
Maximum torque |
2 x rated torque |
Alternating torque |
1 x rated torque |
| Accuracy class % 0,1 or 0,05 (depending on version) |
|
| Output signal VDC
(Rated value) kHz
Speed measurement pulses/rev.
|
±0 ... 10 or
10 ±5, 60 ±20, 100 ±40 and RS-232C
60 or 2 x 180 ... 2 x 3 600 or 2 x 128 ... 2 x 5 120 (dep. on version) |
Nominal speed 1/min |
<15 000 |
Balancing grade Q |
6,3 |
Operating temperature range °C
(Rated temperature range)
|
10 ... 60 |
Case material |
Aluminum, hard anodized |
L mm
D mm
H mm
|
30,5 ... 64
192 ... 311
263,5 ... 382 |
Degree of protection |
IP54 |
Electrical connections |
Binder connector (7-, 8- and 12 pin) |
Properties
Torque measuring flange based on the strain gage principle. The integral digital measurement processing system produces analog or digital output signals transmitted without contact. The rotor has no mechanical bearings and therefore runs without wear in the stator ring.
|
Areas of application
This extremely short design is ideal for internal combustion engines, gearing, roller, wheel load, electric motor and pump test rigs. |
